Energy Alternatives - Your Source for Environmentally Friendly Energy

These racks are made out of 6061 Aluminium known for its good strength and corrosion resistance. All fasteners are stainless steel.

They allow for 6" of roof clearance and follow the slope of the roof.

These racks require the user to supply hardware for fastening the rack to the roof. Ask a sales rep about options for fastening the rack to a standing seam metal roof without penetrations using the S-5! clamps.

These racks are made out of 6061 Aluminium known for its good strength and corrosion resistance. All fasteners are stainless steel.

They allow for 6" of roof clearance and follow the slope of the roof.

These racks require the user to supply hardware for fastening the rack to the roof. Ask a sales rep about options for fastening the rack to a standing seam metal roof without penetrations using the S-5! clamps.

These racks are made out of 5052 Aluminium known for its excellent strength and corrosion resistance, particularly in marine environments. All fasteners are stainless steel.

These racks are made out of 6061 aluminium known for its good strength and corrosion resistance, particularly in marine environments. All fasteners are stainless steel.

These racks allow for 16" of ground clearance if the angle between the panels and the ground is 35 degrees. There is more clearance at larger angles. This clearance allows the solar panels to avoid shading from grass and other plants that might grow up in front of the panels.

These racks are made out of 6061 Aluminium known for its good strength and corrosion resistance. All fasteners are stainless steel.

These racks allow for 16" of ground clearance if the angle between the panels and the ground is 35 degrees. There is more clearance at larger angles. This clearance allows the solar panels to avoid shading from grass and other plants that might grow up in front of the panels. These racks will also work well for flat roofs.

These racks are made out of 6061 Aluminium known for its good strength and corrosion resistance. All fasteners are stainless steel.

These racks allow for 16" of ground clearance if the angle between the panels and the ground is 35 degrees. There is more clearance at larger angles. This clearance allows the solar panels to avoid shading from grass and other plants that might grow up in front of the panels. These racks will also work well for flat roofs.

This rack is made out of 6061 Aluminium known for its good strength and corrosion resistance. All fasteners are stainless steel.

These racks allow for 16" of ground clearance if the angle between the panels and the ground is 35 degrees. There is more clearance at larger angles. This clearance allows the solar panels to avoid shading from grass and other plants that might grow up in front of the panels. These modules will also work well for flat roofs.

This rack is made out of 6061 Aluminium known for its good strength and corrosion resistance. All fasteners are stainless steel.

These racks allow for 16" of ground clearance if the angle between the panels and the ground is 35 degrees. There is more clearance at larger angles. This clearance allows the solar panels to avoid shading from grass and other plants that might grow up in front of the panels. These racks will also work well for flat roofs.

These racks are made out of 5052 Aluminium known for it excellent strength and corrosion resistance, particularly in marine environments. All fasteners are stainless steel.

This rack is made out of 5052 Aluminium known for its excellent strength and corrosion resistance, particularly in marine environments. All fasteners are stainless steel.

These racks are designed to be mounted on a flat roof. These racks allow for adjustability of the solar modules between 35 and 70 degrees. For pitched roofs the support legs can be modified to make them appropriate for your particular roof.

This rack is made out of 5052 Aluminium known for its excellent strength and corrosion resistance, particularly in marine environments. All fasteners are stainless steel.

These racks are designed to be mounted on a flat RV roof. These racks allow for two modes: 30 degree angle and Flat for travelling. Always make sure the rack is secured in the flat position while travelling.

These racks are made out of 6061 Aluminium known for its good strength and corrosion resistance. All fasteners are stainless steel.

These racks are designed to be mounted on a angled roof. These racks allow for adjustability of the solar modules between 35 degrees and 70 degrees.

These racks are made out of 6061 Aluminium known for its good strength and corrosion resistance. All fasteners are stainless steel.

These racks require the user to supply hardware for fastening the rack to the mount platform be it the ground, a cement pad, or something more exotic.

These racks are made out of 6061 Aluminium known for its good strength and corrosion resistance. All fasteners are stainless steel.

These racks are designed to be mounted on an angled roof. These racks allow for adjustability of the solar modules between 35 degrees and 70 degrees.

This rack is made out of 6061 Aluminium known for its good strength and corrosion resistance. All fasteners are stainless steel.

This rack is a holds the solar panels side by side in a left to right direction. Making the rack wider then it is tall. If the array is considered as a whole the array is in landscape format.

These feet mount the solar panel flat on the roof of your RV. The kit includes stainless steel hardware to attach the solar panel to the feet and well nuts to attach the mounting feet to the roof of your RV.

The concept of combining photovoltaic arrays with standing seam metal roofing is growing - and for good reasons. A standing seam metal roof has a life expectancy consistent with that of crystalline PV modules. A 30-year power source, on a 30-year roof with zero penetrations couples the most sustainable roof system available with alternative power generation!

The S-5-U clamp is by far our most popular and most versatile clamp. It will fit about 85% of the standing seam profiles manufactured in North America—including most structural and architectural profiles. It can be used on vertically oriented seams and by rotating the clamp 90 degrees it can also be used on most horizontal 2" seam profiles.

The S-5-U clamp is by far our most popular and most versatile clamp. It will fit about 85% of the standing seam profiles manufactured in North America—including most structural and architectural profiles. It can be used on vertically oriented seams and by rotating the clamp 90 degrees it can also be used on most horizontal 2" seam profiles.

This bit enables you to tighten and loosen the fasteners in the security hardware kit.

Security Hardware is a great way to deter the thief looking to run off with your valuable solar panels. Many crimes are spur of the moment decisions and security hardware discourages thieves from making a snap decision to steal your solar panels.

If this is not possible, or you wish another layer of security, consider the Energy Alternatives security hardware. This kit includes 4 specialty bolts, 4 washers and 4 flangnuts, enough for one solar module.

Mounting solar modules on the side of a pole can be a great way to add solar modules to your array and increase your power production!

These side of Pole Mounts are designed to be mounted on a galvanized steel pipe and are made with corrosion resistant aluminium and stainless steel fasteners.

Mounting solar modules on the side of a pole can be a great way to add solar modules to your array and increase your power production!

These side of Pole Mounts are designed to be mounted on a galvanized steel pipe and are made with corrosion resistant aluminium and stainless steel fasteners.

Mounting solar modules on the side of a pole can be a great way to add solar modules to your array and increase your power production!

These side of Pole Mounts are designed to be mounted on a galvanized steel pipe and are made with corrosion resistant aluminium and stainless steel fasteners.

Mounting solar modules on the side of a pole can be a great way to add solar modules to your array and increase your power production!

These side of Pole Mounts are designed to be mounted on a galvanized steel pipe and are made with corrosion resistant aluminium and stainless steel fasteners.