Energy Alternatives - Your Source for Environmentally Friendly Energy

The Xantrex C-60 controller is one of the world's most advanced work horse charge controllers available.

Standard Features:

This high performance solar charge controller increases battery life by preventing overcharging. Overcharging can cause corrosion and buckling of the lead plates, increased battery water loss and excess hydrogen gas.

The control also prevents power loss back into the solar modules at night, so an external blocking diode is not required.

This controller is designed for use in mobile or stationary photovoltaic energy systems, with complete system monitoring of battery voltage, solar charging current, and charge set-point calibration.

This controller is designed for use in mobile or stationary photovoltaic energy systems, with complete system monitoring of battery voltage, solar charging current, and charge set-point calibration.

Morningstar’s Meter (RM-1) is a universal, four digit display with custom icons that is compatible with several Morningstar controllers and inverters. This meter provides comprehensive system information for easy monitoring including voltage, current and temperature.

Compatible Products:

• SunSaver Duo Controller
• SunSaver MPPT Controller
• SureSine Inverter

The innovative FLEXmax MPPT software algorithm is both continuous and active, increasing your photovoltaic array power yield up to 30% compared to non-MPPT controllers.

The innovative FLEXmax MPPT software algorithm is both continuous and active, increasing your photovoltaic array power yield up to 30% compared to non-MPPT controllers.

These products are used in solar direct pumping applications. They can achieve up 30 - 90 % increase in your water pump than connecting your motor directly to the solar panels.

Standard Features:

Standard Features:

Fully automatic temperature compensation of charge voltage, which further improves charge control and battery performance.

Morningstar’s SunKeeper solar controller provides a low cost regulated output directly from the solar module to maximize battery life in small solar power applications. The SunKeeper is epoxy encapsulated and rated for outdoor use. By mounting directly to the module junction box and wiring through the junction box knockout, the connection is weather-proof. This eliminates the need for an additional housing for the controller.

Morningstar’s SunKeeper solar controller provides a low cost regulated output directly from the solar module to maximize battery life in small solar power applications. The SunKeeper is epoxy encapsulated and rated for outdoor use. By mounting directly to the module junction box and wiring through the junction box knockout, the connection is weather-proof. This eliminates the need for an additional housing for the controller.

Morningstar's advanced SunLight solar lighting controller combines the SunSaver design with a microprocessor for automatic lighting control functions.

A rotary digital switch is used to select from 10 different lighting modes such as dawn to dusk, 2, 4, 6, 8, 10 hours of operation after sunset, few hours on after sunset, off for most of the night, then a few hours on before sunset.

Morningstar's advanced SunLight solar lighting controller combines the SunSaver design with a microprocessor for automatic lighting control functions.

A rotary digital switch is used to select from 10 different lighting modes such as dawn to dusk, 2, 4, 6, 8, 10 hours of operation after sunset, few hours on after sunset, off for most of the night, then a few hours on before sunset.